Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Homeowners Choose KraftMaid Construction
Mason Remodeling Co Miami provides independent Miami Kraftmaid service, cabinet installation, and refacing throughout Miami, including Coral Gables, Coconut Grove, and the coastal condo corridors. We are not a factory-authorized KraftMaid dealer, and we will not pretend otherwise. What we are is a Miami-based crew that has installed, repaired, and refaced KraftMaid cabinetry in hundreds of South Florida homes since long before anyone in our shop kept count. Call (850) 780-8123 for a free estimate, and Isaac Pruett or one of our senior techs will tell you exactly what we can do for your KraftMaid kitchen.
Why Trust Mason Remodeling Co Miami for Your KraftMaid Construction?
KraftMaid cabinets are built well, but they are built for a national market. Miami is not a national market. The salt air off Biscayne Bay, the 70-percent humidity that never quits, and the direct coastal sun do things to thermofoil, plywood, and steel hardware that a homeowner in Ohio will never see. Our team has spent well over a decade working Miami neighborhoods, and that means we know which KraftMaid components fail here and which ones hold up. Isaac Pruett earned his construction trade certificate from Los Angeles Trade-Technical College and spent years running rough framing, finish carpentry, and cabinetry before relocating to South Florida. He reads a job site fast and gives homeowners a straight number. That matters when you are deciding between a $300 hinge replacement and a $3,000 reface. As an independent KraftMaid service provider, we are not tied to factory procedures. We are tied to what works in Miami.
Our techs see KraftMaid Vantage, Benton, Durham, and New Haven lines every week, not once a quarter. That repetition means we can often identify a failure by sound or sight before we pull a single drawer. We follow the Threshold Standard on every visit: background-checked, identity-verified techs in clean marked uniforms, a photo ID badge at the door, and the homeowner receives the tech’s name and photo before arrival. You know exactly who is walking into your kitchen.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Miami
- Thermofoil delamination on Vantage doors and drawer fronts. The vinyl layer peels away from the MDF core when Miami humidity works its way in at the edges, especially near dishwashers and ranges where heat and moisture alternate all day. You will see bubbled edges first, then exposed raw MDF that swells and turns chalky.
- Base cabinet frame swelling and hinge screw stripping. Repeated humidity cycles cause the particleboard or MDF in KraftMaid Benton and Durham base frames to expand and contract. Over time, hinge screws lose their bite. Doors sag. In the worst cases, the frame itself needs a Dutchman repair or selective replacement.
- Soft-close hinge and drawer glide corrosion. KraftMaid’s standard nickel-plated hardware is not built for salt air. We regularly replace original soft-close mechanisms on coastal Miami properties with stainless steel aftermarket hardware that resists pitting and rust. The difference in longevity is measured in years, not months.
- Finish clouding on maple and cherry fronts. KraftMaid New Haven’s maple and cherry door fronts sit under direct South Florida sun in kitchens with east or west exposures. The UV breaks down the topcoat and leaves a hazy, whitish film. Refinishing or replacing affected doors is the fix; wiping will not bring it back.
- Drawer box separation at dovetail joints. KraftMaid drawer boxes are typically maple or birch with dovetail joinery, but adhesive bond lines fail under repeated moisture swings. A drawer that has spent five summers in a non-air-conditioned Miami condo will start to rack and bind.
KraftMaid Parts & Our Repair-vs-Replace Approach
We use genuine KraftMaid replacement parts whenever available for doors, hinges, and drawer glides. Factory doors match factory finishes, and matching is the hardest part of any reface or partial repair. But we are honest about where original parts fall short in Miami. KraftMaid’s standard internal hardware, particularly soft-close mechanisms, corrodes faster near the coast than it should. In those cases, we recommend and install marine-grade aftermarket components that survive salt air far better than the original parts. If a cabinet box has swelled at the toe kick or shows mold, we will tell you straight: refacing over a compromised box is throwing money at a problem that will return. Selective replacement costs more now and far less than a full redo later. Call (850) 780-8123 if you are unsure whether a box is worth saving; our estimate is free and we will show you what we see.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the full kitchen, not just the problem area. A peeling Vantage drawer front is seldom the only issue, and finding moisture sources early prevents repeat failures.
- 2
Written price. You get a line-item quote before any work starts. No verbal estimates that grow on the final bill. This is our standard, never an upgrade.
- 3
Repair or install. We handle cabinet installation, refacing, and full kitchen remodels. For thermofoil failures, we mill new fronts and laminate with marine-grade thermofoil matched to your original finish. Hardware gets upgraded where Miami conditions demand it.
- 4
Test. Every drawer, hinge, and soft-close mechanism is cycled, adjusted, and cycled again. We check for square, reveal alignment, and binding before we call the job done.
- 5
Warranty. Every completed project carries a written guarantee with clearly stated terms, including what is covered and for how long. If something fails within 365 days of the completion date, we make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Miami
We work on the full KraftMaid lineup, including Vantage, Benton, Durham, and New Haven series. That covers slab and raised-panel door profiles, maple, cherry, oak, birch, and painted finishes. We install new KraftMaid cabinetry, reface existing boxes with matched doors and drawer fronts, and retrofit hardware where KraftMaid Construction in Doral, FL and throughout Miami’s moisture load demands it. Our local stock for Miami service calls includes common hinge sizes, soft-close mechanisms in stainless steel, touch-up kits, and marine-grade thermofoil in the most common KraftMaid white and neutral tones. If a part is not in our van, we order it same day from local Miami suppliers wherever possible.
We Also Service These Brands
KraftMaid is a strength, not a limit. Our Kraftmaid in Miami Beach clients and throughout the area also count on us for Cambria, Silestone, Kohler, and Toto installations and service. When a kitchen remodel includes new countertops, plumbing fixtures, and cabinetry, one crew handles the whole job with one written price.
FAQs – KraftMaid Construction Service in Miami
Yes, in most cases. We use marine-grade thermofoil that matches the original Vantage white matte tone closely, and we mill new fronts to factory dimensions. Exact matching depends on the age of your cabinets and how much sun exposure the original fronts have had. In one Coral Gables kitchen, we replaced six Vantage drawer fronts near the dishwasher where peel-back exposed raw MDF. We laminated the new fronts in a matched white matte tone and swapped the glides for stainless steel versions. The homeowner could not find the new drawers by looking. Call (850) 780-8123 and we will tell you whether a partial reface will look right in your kitchen.
The standard KraftMaid hinge is nickel-plated steel, built for a typical interior environment. Miami’s salt air, combined with humidity that stays above 70 percent for months, accelerates pitting and oxidation on exposed metal surfaces. Homes within a mile of the coast see the fastest corrosion; Biscayne Point and the Venetian Islands are particularly aggressive. Our fix is stainless steel or marine-grade aftermarket hinges and glides that shrug off salt air. This is not a factory warranty issue; it is an environment issue. Call (850) 780-8123 if your soft-close hinges are starting to feel gritty or sticky.
If the box itself has swollen, we recommend selective replacement. Refacing hides surface problems, but a swollen toe kick means the structural substrate has absorbed water. Once particleboard or MDF swells, it never returns to its original dimensions, and hinges mounted to that substrate will keep stripping. We will give you a straight answer on which boxes are salvageable and which should go. Call (850) 780-8123 for a free estimate, and we will show you exactly what we would do in our own kitchens.
Yes. Maple and cherry fronts with clear or tinted topcoats develop a hazy white film when UV exposure breaks down the finish layer. This is common in Miami kitchens with east or west windows and no impact-rated tinting or film on the glass. The fix is refinishing or replacing the affected doors. Once clouding appears, no amount of cleaning restores the original clarity. Call (850) 780-8123 and we can tell you whether your finish is past saving.
No. KraftMaid’s warranty covers original materials and construction. Refacing changes the doors, drawer fronts, and hardware, which means the original warranty no longer applies to those components. Our reface work carries its own written guarantee covering everything we install, including clear terms on what is included and for how long. We will never claim your factory warranty survives a reface. Call (850) 780-8123 if you want to talk through the math of refacing versus replacing under warranty.
KraftMaid construction and service in Miami varies by scope. Here are the ranges we quote most often:
| Service | Miami Price Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Cabinet Installation | $4,720 – $15,340 |
| Backsplash Installation | $945 – $2,950 |
Smaller repairs, like a single hinge replacement or drawer glide swap, often run under $500. Refacing a full kitchen starts around $4,700 and goes up depending on door count and finish selection. Every project gets a written price before we start. Call (850) 780-8123 for an exact quote, your estimate is free.
Book Your KraftMaid Service in Miami, FL
Tell me what you need done. As your General Contractor, I’ll tell you what it costs and when it’s finished, and I’ll mean both. That is how Isaac runs his shop, and it is how we quote every KraftMaid job in Miami. Whether you need one drawer front refaced or a full Vantage kitchen installed, call (850) 780-8123. We answer live, and we will put a real price in writing before a single tool comes out.
Written by Isaac Pruett, Owner at Mason Remodeling Co Miami, serving Miami since 2004.
