Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Miami Owner’s Guide
CWS bathroom remodeling in Miami typically runs $10,620 – $33,040 installed, and we stock the most common CWS-compatible replacement components on our trucks so we can usually start same-day once you’ve approved the written quote. Most Miami homeowners discover a CWS part has failed when they notice water seeping at the shower base, a vanity door that no longer closes square, or tile grout cracking along a CWS pan line. You’ll want an exact match on dimensions and finish, which is why we verify the model stamp on the existing part before ordering or installing anything.
Key takeaways:
- Installed CWS bathroom remodeling in Miami runs $10,620 – $33,040 depending on scope, materials, and whether we’re replacing one failed component or the full bath assembly.
- We’re an independent Miami contractor, not a CWS dealer, so we can source OEM or quality aftermarket equivalents and give you a straight price on either.
- Every quote is written, line-itemed, and delivered before any work starts. The 365-Day Done Right Promise covers the install for a full year from completion date.
- Isaac Pruett, owner, has been working Miami bathrooms for well over a decade and reads a job site fast: what failed, why, and what it costs to make it right.
Which CWS Models This Applies To
CWS bathroom systems were sold through a handful of regional distributors in South Florida, and the parts most owners need to match are the wall surrounds, shower pans, and vanity cabinet hardware. The key identifier is a small embossed stamp on the underside of the shower pan or the inside face of the vanity door hinge, usually a two-letter prefix followed by a four-digit production code. That code tells us the panel thickness, flange height, and drain offset, and it’s the difference between a drop-in replacement and a fight with the rough opening.
The compatibility gotcha most Miami homeowners don’t see coming: CWS changed its vanity cabinet depth from 18 inches to 21 inches around 2011, and the older 18-inch carcasses don’t accept the newer drawer slides. If your CWS vanity dates from before that change, we usually recommend a full vanity replacement rather than trying to retrofit hardware that will bind again in the Florida humidity. We also keep KraftMaid, Cambria, and Silestone components in our supply chain when an owner wants to upgrade surfaces at the same time.
Whether to go OEM or aftermarket comes down to one question: is the failed part visible or structural? For visible finishes like a wall surround or a vanity door, aftermarket equivalents from our vetted suppliers usually cost 30 – 40% less and hold up as well in Miami’s heat and salt air. For structural parts like shower pan liners or drain assemblies, we recommend OEM even when it costs more, because the tolerances are exact and we don’t want your bathroom leaking into a neighbor’s unit a year from now.
Styles & brands we work with
Signs Your CWS Bathroom Remodeling Is Failing
- Water pooling at the shower base edge after every use. The CWS pan gasket under the wall surround has compressed or split. Left alone, water works through the subfloor, and in Miami’s slab-on-grade construction that means re-leveling, not just re-sealing.
- Vanity drawers that stick or fall off their slides. The humidity in Coconut Grove and most Miami neighborhoods swells the MDF carcass and the old slides lose their track. Lubricating helps for about a week, then the binding comes back.
- Hairline cracks running along the grout lines of the shower wall surround. CWS surrounds flex with temperature changes, and grout doesn’t. The crack itself isn’t the problem, the movement behind it is.
- A musty, sour smell that doesn’t go away after cleaning. That’s water trapped behind the surround panel or under the pan liner. In Miami’s climate, it becomes mold faster than most homeowners expect, and it won’t dry on its own.
- Vanity mirror delaminating at the edges or fogging between layers. CWS mirror backing was never rated for Miami’s wet-bath conditions. Once the edge clouding starts, it spreads until the glass is permanently hazed.
Replacement Cost & What’s Included
CWS bathroom remodeling in Miami runs $10,620 – $33,040 installed. The spread comes down to scope: replacing one failed shower surround runs toward the lower end, a full gut-and-rebuild with a new CWS pan, surround, vanity, and plumbing trim runs higher. Here’s how typical line items break down in Miami:
- Single CWS component replacement (pan, surround, or vanity): $3,540 – $10,030
- CWS tub-to-shower conversion with new surround and pan: $4,130 – $11,800
- Full CWS bathroom remodel including vanity, surround, floor tile, and fixtures: $10,620 – $33,040
- Small bathroom swap with compact CWS vanity and shower pan: $5,900 – $14,160
Every quote is written before we start. That means line-item parts, line-item labor, trash haul, and the exact total. No verbal estimate that grows on the final bill. The install carries our 365-Day Done Right Promise: if anything we installed fails within a year of completion, we fix it at no cost. No dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things before picking up the phone. Confirm where the water is actually coming from by drying the shower base thoroughly, then watching the pan edges and the drain collar separately. Check the vanity door hinges for loose screws, and look under the sink for any slow drip at the supply stops. Those checks tell us a lot before we even arrive.
What you shouldn’t do is pull a CWS shower pan or wall surround yourself. The pan is sealed to the drain and the wall cavity in ways that hide the actual failure point, and once you break the seal, you have an open wet floor that gets worse by the hour. Same for vanity removal in Miami condos and older homes, where shut-off valves are often corroded and the false wall behind a CWS vanity isn’t always where it looks like it is. If you’ve already started and something’s open, don’t keep going. Call (850) 780-8123 and we’ll assess what’s there and give you a written number for finishing it right.
FAQs
The CWS shower pan and surround assembly typically lasts 12 – 18 years in Miami’s humidity before the gaskets and grout lines start failing. Vanity carcasses last 8 – 12 years in wet-bath conditions. Call (850) 780-8123 if yours is showing cracks or pooling water, and we’ll tell you what’s repairable versus what’s done.
Shower pan gaskets and minor grout failures can sometimes be re-sealed, but a cracked CWS pan or a swollen vanity carcass cannot realistically be repaired, the core material is compromised. We’ll tell you straight which one you have. Call (850) 780-8123 for an honest assessment and a written quote either way.
A single component swap (pan, surround, or vanity) is usually a one-day job once parts are on hand. A full CWS bathroom remodel in Miami typically runs five to ten working days depending on rough-in work and tile. Call (850) 780-8123 and Isaac will give you the schedule and price before you commit to anything.
We stock the most common CWS pan, surround, and vanity hardware on our Miami trucks, plus we have direct supply lines for OEM and aftermarket equivalents when a finish or size needs to be matched. Call (850) 780-8123 with your model stamp and we’ll check availability while you’re on the phone.
Get Your Written Quote
If your CWS bathroom part has failed, don’t guess at the fix and don’t wait on a handyman who has to order everything sight unseen. Tell me what you need done. I’ll tell you what it costs and when it’s finished, and I’ll mean both. Call (850) 780-8123 to schedule your free estimate, and we’ll have your written price in hand before any tool is unpacked.
Written by Isaac Pruett, Owner, Mason Remodeling Co Miami at Mason Remodeling Co Miami, serving Miami and nearby areas.
