Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Miami Owner’s Guide
CGI kitchen remodeling in Miami typically runs $16,520 – $53,100 installed, depending on cabinet grade, countertop material, and whether you’re doing a full tear-out or a staged refresh. If you bought a home with CGI cabinetry or specified CGI components during a previous remodel, you already know the brand’s modular frame system means most repairs don’t require gutting the whole kitchen. The problem usually shows up as a hinge that’s pulling loose, a drawer slide that’s grinding, or a door front that won’t sit flush anymore.
What most Miami homeowners discover is that CGI parts aren’t sitting on the shelf at the big-box stores. They’re order-matched to the original cabinet line, and if you guess wrong on the series, you end up with a drawer front that’s 3/8 inch off and a contractor telling you “nobody will notice.” You’ll notice. We match the part correctly the first time.
Key Takeaways
- Full CGI kitchen remodels in Miami: $16,520 – $53,100 installed
- Individual component repair or replacement: usually $472 – $2,950 depending on the part
- Mason Remodeling Co Miami is an independent service provider, not affiliated with CGI
- Written price before work starts, and a 365-Day Done Right Promise on the finished job
- Live person answers every call at (850) 780-8123, 24/7
Which CGI Models This Applies To
CGI cabinetry runs in distinct series lines, and the compatibility gotcha is real: a door hinge from a CGI Essentials line won’t cross over to a CGI Signature or Reserve cabinet, even when the overlay looks identical from two feet away. The mounting plate depth, the cup size, and the bored hinge pattern all vary by series. When we send a Miami homeowner a replacement part, we confirm the cabinet line first by checking the interior stamp or the specification sticker inside the sink base cabinet, then match the part to that exact series.
For the OEM-versus-aftermarket decision, here’s how we advise our Miami customers. If the cabinet box itself is sound and you’re replacing drawer slides, hinges, or shelf pins, a quality aftermarket equivalent from a supplier like Blum or Salice does the job at 30 – 50% less than CGI-branded hardware. If you’re replacing a door front, drawer face, or a finished end panel, the color-matching risk makes OEM the smart call, especially in Florida sunlight. UV exposure near Miami windows bleaches finishes unevenly, and an aftermarket door that was color-matched indoors will show its mismatch within six months near a south-facing window.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Drawer slides grinding or hanging up. Miami’s humidity expands the wooden drawer boxes, which then scrape against under-mounted slides. The slide isn’t always the culprit; sometimes the box needs a shave and reseal before the new slide goes in.
- Hinges pulling loose from the cabinet face. The screw holes wallow out over time, especially on doors that get opened ten times a day. A quick fix is driving a matchstick and glue in the hole; the real fix depends on whether the face frame is solid wood or particleboard.
- Door fronts sagging or no longer sitting flush. This is usually hinge wear, but in CGI cabinets with adjustable hinges, it can also mean the hinge plate has slipped. Sometimes the fix is a simple adjustment, not a new part.
- Melamine or veneer peeling along bottom edges. Near a dishwasher or sink, steam and small water splash cycles lift the edge banding. Once it starts peeling, it won’t stop, and replacing the banding cleanly is a skill job.
- Crown molding or light rail separating from the cabinet run. In Miami’s heat, the expansion and contraction cycle works fasteners loose. Usually you’ll see it first on the longest cabinet run, where the cumulative movement is biggest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full CGI kitchen remodel in Miami, figure $16,520 – $53,100 installed, with the broad range driven by whether you’re keeping existing cabinet boxes and swapping doors and hardware or gutting to the studs and starting fresh. Small kitchen remodels start around $10,620. If the job is a targeted repair, like replacing failed drawer slides across a kitchen, plan on $472 – $2,125 parts and labor.
Every Mason Remodeling Co Miami price is written down before any work starts. You’ll see the part number, the material cost, the labor, and the warranty term in writing. No verbal estimates that grow on the final bill, no change orders nobody approved. If the scope changes mid-project, we stop, we talk, we write it down, and then work resumes.
The finished work is covered by our 365-Day Done Right Promise. If something isn’t right within a year of completion, we make it right at no cost to you. Plain terms, not fine print.
DIY or Call Us?
There are a few things a Miami homeowner can safely check before calling us. Look at the cabinet stamps and take photos of any numbers on the hinge plates or slide rails. Check if the cabinet face frame is solid wood or particleboard, because that changes the repair approach. If it’s a sagging door, try the hinge adjustment screw first, it’s a 30-second fix that costs nothing.
But if you’re replacing gas shocks on a lift-up cabinet door, dealing with a full-height pantry door, or pulling cabinet boxes off the wall, stop. Gas shocks can snap a finger. Full-height doors are heavy enough to dislocate a shoulder if they fall. And cabinet boxes hide plumbing and electrical in most Miami kitchens, so pulling one without checking what’s behind it can turn a $300 repair into a $3,500 emergency. If you’re not sure which end of the problem you’re looking at, call (850) 780-8123 and describe it. We’ll tell you whether it’s worth a service call before we ever send a truck.
FAQs
CGI cabinet boxes typically last 20 – 30 years in South Florida homes, but hinges and drawer slides wear out in 10 – 15 years under daily use. Humidity shortens hardware lifespan here compared to drier climates. Replacing hardware is normal maintenance, not a sign the cabinets need a full replacement. Call (850) 780-8123 if you want us to assess whether your cabinets are in the hardware-failure phase or the structural-failure phase.
Some drawer slides can be cleaned, lubricated, and re-adjusted to work smoothly again. If the ball bearings are worn flat or the slide is visibly bent, a repair won’t hold. We’ll tell you which situation you have and what the honest fix costs. Call (850) 780-8123 for a written estimate.
Most hinge, drawer slide, and hardware replacements take 2 – 4 hours for a single cabinet run. If we need to order a CGI-specific door front or drawer face, expect 7 – 14 days for the part to arrive plus a half-day install. We’ll give you a written timeline before we order anything. Call (850) 780-8123 to get your exact timeline.
We keep common CGI-compatible hardware on our trucks, including slide rails, hinge plates, and shelf pins. Door fronts and drawer faces are ordered per job to match your exact cabinet line and finish. If we don’t have the part on the truck, we’ll have the written lead time before you commit to anything. Call (850) 780-8123 and we’ll check inventory while you’re on the phone.
Written by Isaac Pruett, Owner, Mason Remodeling Co Miami at Mason Remodeling Co Miami, serving Miami and nearby areas.
If you’re weighing a CGI kitchen repair or a full remodel, call (850) 780-8123 for a free estimate. We’ll give you a straight number, a written schedule, and a named crew member before any work begins. Tell me what you need done. I’ll tell you what it costs and when it’s finished, and I’ll mean both.
