Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Miami Owner’s Guide
If you have an Oldcastle kitchen and a cabinet hinge, drawer slide, or countertop seam has failed, we can match the part, price it honestly, and install it in Miami. Most Oldcastle kitchen remodeling part replacements run $220 to $1,400 installed depending on what failed and whether we’re matching OEM hardware or upgrading the component. Homeowners usually find us after a drawer starts grinding, a cabinet door hangs crooked, or a laminate edge peels back and they realize the quick fix from the home center didn’t last.
Oldcastle kitchen lines live in a lot of Miami condos and single-family homes, especially townhouses built between 2005 and 2018. The hardware and cabinet box dimensions follow a handful of consistent specs, but the failure points are almost always the same: soft-close mechanisms that lose their damping, hinges that strip at the cup, and drawer glides that seize in salt air. We source the correct replacement and install it so it works like the rest of the kitchen was supposed to.
Which Oldcastle Models This Applies To
Oldcastle kitchen cabinetry appears under several badge names across Miami, which is the first thing that trips people up. The same cabinet box was often sold under the builder’s own line name on the invoice, so the label inside the drawer doesn’t always say Oldcastle. Look for a small white or silver sticker inside the left drawer wall or on the cabinet side panel. That sticker carries a manufacture code and a cabinet series letter, and that letter is what we need to match the door profile and finish.
The compatibility gotcha most owners hit: Oldcastle used at least three hinge cup sizes over the years. If you buy a 35mm hinge and your door is drilled for 26mm, it won’t sit flush no matter how much you adjust it. We measure the cup and the overlay before ordering. For drawer slides, the mounting height and the tab style matter more than the brand name. We keep quality aftermarket equivalents on the truck that match the original’s mounting hole pattern, so we often don’t need to wait for an OEM order. The OEM decision comes down to this: if the finish has to match exactly, we order Oldcastle’s part. If it’s hidden hardware, we’ll install a name-brand aftermarket piece that often outlasts the original and costs less.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- A drawer that slams or grinds when it closes. The soft-close damper has failed or the rear glide wheel has flattened. Salt air in Miami accelerates this on glides that aren’t sealed, especially in kitchens near Biscayne Bay or anywhere within a mile of the coast.
- A cabinet door that sags and won’t stay aligned. The hinge cup screws have stripped out of the particleboard, or the hinge itself is bent where the arm meets the cup. You can tighten it once or twice. The third time, the screw just spins.
- A laminate edge that’s lifting at the countertop seam. Miami’s humidity gets into the substrate at the sink cutout or dishwater seam. The laminate separates from the core, and re-gluing it without clamping pressure and a sealed edge doesn’t hold.
- A pull-out shelf that jams mid-travel. The slide has worn a flat spot in the ball bearing track or the mounting tab has cracked. Forcing it hard is how drawers end up misaligned with scrubbed-out mounting holes.
- A soft-close door that slams once the weather turns. The damper seals shrink in dry winter air and swell in summer humidity. If one hinge is weak, the door closes fine in July and slams in January. That’s the tell to replace both hinges, not just the weak one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, Oldcastle kitchen remodeling part replacement lands between $220 and $1,400 installed. A single soft-close hinge pair runs $220 to $380 with labor. A full drawer glide swap is $260 to $540. Replacing all the hardware on a 10-foot run of cabinets, hinges and slides included, typically falls between $700 and $1,400 depending on the hardware grade and whether we’re refinishing or touch-matching any surfaces.
| Job | Installed Price Range |
|---|---|
| Soft-close hinge pair replacement | $220 – $380 |
| Drawer glide replacement (one drawer) | $260 – $540 |
| Full hardware swap, 10-ft run | $700 – $1,400 |
| Laminate edge repair at seam | $300 – $650 |
Every quote is written before work starts. The price includes the part, the labor, and the 365-Day Done Right Promise: if it fails within a year of completion, we fix it at no cost. No hourly billing surprises, no change orders handed over after the fact.
DIY or Call Us?
You can safely identify the part yourself: open the drawer, read the sticker inside the left wall, and take a photo of the hinge or glide with a tape measure held against it. Send us the photo and we can often quote the job over the phone. What we don’t recommend is drilling new holes into an Oldcastle cabinet box. The substrate is particleboard with a thin laminate skin. One wrong pilot hole and the new screw has nothing to bite. If the old screw holes are already stripped, that’s a repair that needs dowel fill, adhesive, and re-drilling after cure time, which is a lot less fun than it sounds.
If the issue is a high-tension mechanism or a cabinet that’s coming off the wall brackets, let us handle it. Cabinet boxes under countertop load are heavy and a failed wall mount isn’t a hand-tool fix. Call (850) 780-8123 and we’ll walk you through what you’re looking at.
FAQs
Hinges and glides typically last 7 to 12 years in Miami before salt air and humidity degrade the damping or bearing surfaces. Homes within a mile of the coast lose a few years off that range, and we routinely replace coastal kitchen hardware at the 8-year mark.
If yours are failing earlier, call (850) 780-8123 and we’ll check whether the wrong hardware was installed in the first place. Estimates are free.
Soft-close dampers inside the hinge barrel cannot be repaired. They’re sealed units. Stripped hinge cup holes can sometimes be repaired with dowel fill and re-drilling, but that’s a temporary bridge, not a long-term fix in particleboard. We’ll tell you straight which path makes sense before any work starts. Call (850) 780-8123 for an honest read.
A hinge pair takes us under an hour including alignment. A full hardware swap on a 10-foot run is a half-day job. We schedule a written time window and the crew arrives with the name and photo already sent to your phone, uniformed and badged at the door.
We carry quality aftermarket hinges, glides, and soft-close dampers in the common Oldcastle cup sizes and mounting patterns, so most repairs are done same-visit. If your finish requires an exact OEM match, we order it and return once it arrives. You’ll hear exactly which path applies before we ring in anything.
If you also have cabinetry from KraftMaid, or countertops from Cambria or Silestone, we service those too. Tell me what you need done. I’ll tell you what it costs and when it’s finished, and I’ll mean both. Call (850) 780-8123 for a free estimate on your Oldcastle kitchen part replacement in Miami.
Written by Isaac Pruett, Owner, Mason Remodeling Co Miami at Mason Remodeling Co Miami, serving Miami and nearby areas.
