Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Miami Owner’s Guide
We stock and install Therma-Tru-compatible doors, door slabs, hinges, weatherstripping, sills, and related hardware across Miami, with most replacements running $470 – $2,125 for component repair and $944 – $5,900 for full door slab or frame work. We carry common OEM parts on the truck, and same-week scheduling is standard for Miami homes in Coconut Grove, Kendall, Coral Gables, and Pinecrest. Most homeowners reach out after the door starts dragging on the threshold, the multipoint lock stops engaging cleanly, or the bottom sweep has worn to nothing and damp Miami air is pushing straight through. You need the part identified, quoted, and installed without a guessing game. That’s the page you’re on.
Key Takeaways
- We replace Therma-Tru hinges, thresholds, sweeps, astragals, multipoint lock assemblies, and glass inserts across Miami.
- Component-level repair starts around $470; full door slab replacement lands between $944 and $5,900 installed.
- Therma-Tru uses non-standard hinge mortises and threshold profiles on many series: aftermarket parts often don’t sit flush, and we’ve torn out enough bad retrofits to tell you exactly which pieces must stay OEM.
- Every quote is written, line-itemed, and fixed before work starts. Isaac Pruett or a named crew lead does the walkthrough personally.
Which Therma-Tru Models This Applies To
This page covers the Therma-Tru door and window lines most common in Miami homes: the Classic-Craft and Fiber-Classic fiberglass entry doors, Smooth-Star steel doors, Pulse and Benchmark door systems, and the Slim-Line and Classic-View patio door glass inserts. If you own a Therma-Tru with a multipoint lock, an adjustable sill, or a fiberglass slab, the parts we discuss here are the ones that fail first in Florida humidity.
Identification is the step everyone skips and regrets. Look at the hinge edge of your door slab: Therma-Tru stamps or labels their series, swing, and size near the top or bottom hinge mortise. Match that label, not just the door’s visible width. A Classic-Craft door and a Smooth-Star door can measure the same and use different sill profiles entirely. For hardware, Therma-Tru commonly specs Hoppe multipoint locks and Endura or Clear Choice thresholds. On glass, the insulated unit size and thickness are marked on the spacer bar inside the door lite.
Here’s the honest version on OEM versus aftermarket: for hinge screws, bottom sweeps, and basic weatherstripping, quality aftermarket equivalents hold up fine, and we install them regularly. For multipoint lock bodies, adjustable sills, and fiberglass slab matching, we insist on OEM or equal-spec. We’ve cut open doors where a generic sill didn’t seat the sweep correctly and Miami rain found its way over the threshold within a season. That’s not a part savings; that’s a floor repair.
Styles & brands we work with
Signs Your Therma-Tru Windows & Doors Is Failing
- Door drags or catches on the threshold. The adjustable sill cap has usually worn low or the hinges have sagged from the extra weight of a South Florida security screen. Left alone, the slab chews the weatherseal and the drag becomes a gap.
- The multipoint lock needs a hip check to engage. Therma-Tru’s multipoint systems bind when the slab settles or the strike plate shifts. Forcing the handle bends the internal gearbox, and that’s a $300 – $500 part rather than a $30 adjustment.
- Daylight or moving air around the door edge. The compression weatherstrip is dead. In Miami, dead weatherstripping isn’t cosmetic: it’s the difference between a manageable power bill and an AC unit that never cycles off.
- Water stains on the interior floor near the door. The corner pads on a Therma-Tru sill shrink with age and salt air. Once the corner seal goes, wind-driven rain from an afternoon storm wicks straight under the door.
- Fog or moisture between the glass panes. The insulated glass unit’s seal has failed. It can’t be repaired; it’s replaced. What you can do is act before the frame starts retaining moisture and swelling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Miami, Therma-Tru component and door work at our company falls into these installed ranges:
- Bottom seal, weatherstripping, or hinge adjustment: $295 – $825
- Door repair (sill, lock realignment, slab adjustment, threshold replacement): $470 – $2,125
- Full window or door replacement (slab, frame, weatherseal, hardware, hauling): $944 – $5,900
What moves the number: whether we’re replacing a seal versus a complete slab, whether the opening is standard or a custom Miami spec (narrower than 36 inches is common in older Coral Gables and Coconut Grove houses), and whether the jamb itself is too far gone to save. Your quoted price includes the part, the labor, the in-person verification visit, and disposal of the old component. We write the full scope and cost before we touch the door, and we cover the work with a 365-Day Done Right Promise: if anything we installed isn’t right within a year, we return and fix it at no charge.
DIY or Call Us?
Some things you can handle safely. Replacing a worn Therma-Tru spring-loaded bottom sweep is about fifteen minutes with a flathead screwdriver. Cleaning the sill track and checking that weep holes aren’t clogged with Miami silt: entirely reasonable. Replacing a hinge screw that’s stripped: fine, if you know the right thread pitch.
Where we see Miami homeowners get hurt, literally and financially, is the slab. Therma-Tru entry doors weigh seventy to a hundred pounds or more once the weatherseal and hardware are off. If one drops or swings on a hinge while your hands are occupied, you’re not saving money; you’re missing work with a crushed finger or a bent slab. The multipoint lock is the other one: loosening the wrong gearbox screw under tension sends the lock out of time, and suddenly the door locks but won’t unlock from inside. We’ve taken those calls. Call us at (850) 780-8123 before the door wins. Isaac Pruett or a named, verified technician will walk the problem with you, quote it straight, and if it turns out to be a five-minute adjustment on a part we already have on the truck, we’ll tell you that too.
FAQs
A properly maintained Therma-Tru entry door should give you 20 to 30 years in Miami, but the hardware and weatherseals live shorter lives: bottom sweeps and compression seals typically need replacing every 3 to 5 years because the salt air and afternoon storms accelerate wear. Plan for component service long before you plan for slab replacement. Call (850) 780-8123 and we’ll tell you on the phone whether your issue sounds like a seal, a hinge, or the slab itself.
Yes, and more often than not we do. Locks, hinges, sills, sweeps, and threshold corners are all replaceable components, and if the slab is sound, the repair gets the door back to factory behavior. Replacement only makes sense when the slab itself is cracked, the jamb is water-damaged, or the glass insert has failed and the owner wants a different lite. We’ll tell you which one you have before we quote a dollar amount.
Most seal, sweep, and hinge work is finished in under two hours. Full slab replacement on a standard opening is usually a half-day job; custom-sized slabs or frame work can run a full day. The quote you receive includes the time, and our crews keep the schedule we agree on.
We stock common Therma-Tru bottom sweeps, corner pads, weatherstrip, and multipoint lock components on our trucks for same-week service across Miami. Less common items are ordered direct from Therma-Tru or their distribution partners, typically arriving in 3 to 5 business days. Tell us the label info from your door’s hinge edge and we’ll tell you on the first call whether your part is a stock item or an order.
If your Therma-Tru door or window is dragging, leaking, or locking like it has a grudge, call (850) 780-8123. We’re the same crew that stocks parts for KraftMaid cabinetry, Cambria surfaces, and Silestone counters, because Miami homes run on systems, and a failed seal is never just a failed seal. Tell us what you need done. We’ll tell you what it costs and when it’s finished, and we’ll mean both. Your free estimate includes the part, the labor, and a written price before anything gets unscrewed.
Written by Isaac Pruett, Owner, Mason Remodeling Co Miami at Mason Remodeling Co Miami, serving Miami and nearby areas.
