Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Miami Owner’s Guide
Boral fence installation in Miami typically runs $4,130 to $10,620 for a standard residential run, including removal of the old section, new rails, pickets, and all fasteners matched to your existing layout. We stock Boral-compatible fence components and can usually complete a straight replacement run the same week we look at the job. Most Miami homeowners discover a failing Boral fence after a storm pushes a section out of line, or when a gate starts dragging on its hinges and won’t close against the latch anymore.
The way it usually goes: you notice the fence line looks soft in one spot, or a picket cracked near the bottom rail and the whole panel feels loose when you push on it. Boral fencing is a composite material built to handle humidity, which matters in Miami more than people think. But concrete set in sandy South Florida soil shifts, salt air works on hardware, and a fence that looked solid three years ago can start leaning after one good tropical season.
Which Boral Models This Applies To
Boral fencing comes in a few distinct profiles, and the part you need depends on which one was installed. The most common lines we see around Miami are the traditional picket, the privacy board, and the ranch rail style. Each uses different picket widths, rail channel dimensions, and post sleeves, so a part from one line will not fit another, even if it looks close from the curb.
Here’s the compatibility gotcha we run into constantly: Boral rails are notched to accept specific picket thicknesses. The privacy board picket is significantly thicker than the traditional picket, and if you try to slide a thinner picket into a rail channel cut for the heavier board, you’ll get wobble, wind rattle, and eventually a popped picket. We measure the rail channel and the picket thickness before ordering anything. As for OEM versus aftermarket, Boral’s own components are the safest match, but there are quality aftermarket aluminum inserts and stainless hardware upgrades that actually outlast the original in Miami’s salt air. We’ll tell you which one makes sense for your fence line and your budget rather than defaulting to the most expensive option.
To identify what you have, check the post caps and the underside of the top rail. Boral stamps its profile name on the inside of most pickets and on the post sleeves. If the stamp is faded or painted over, we can match the profile from a photo and a measurement. We also keep components for KraftMaid, Cambria, and Silestone on the truck for interior work, but Boral fence parts come from our local supplier and usually land within two business days.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Leaning posts at the gate or corner. This almost always means the concrete footing has cracked or the post base is corroding at ground level. In Miami, the water table sits high, and a post set too shallow will start moving within a few seasons.
- Pickets rattling against the rail. The rail channel has widened from heat cycling, or the factory clips have snapped. One loose picket is a fix; a full panel rattling usually means the rails need replacing, not just the pickets.
- White chalky residue running down the face. That’s salt and mineral efflorescence working through the composite. It’s cosmetic at first, but it tells you moisture is moving through the material, which shortens the fence’s life in Miami’s humidity.
- Gate dragging on one side. The hinge post is pulling out of true, or the gate frame itself has settled. A Boral gate is heavy, and every drag against the ground adds torque that loosens the post faster.
- Bottom rail cracked or split near a post. This is the classic failure point on Miami Boral fences, usually from a mower clip or a weed trimmer that cut into the material years ago. Once water gets inside the composite through that crack, the rail expands and fails from the inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral fence installation in Miami, you’re looking at a real range of $4,130 to $10,620 depending on how much fence is involved, whether we’re pulling and resetting posts, and what condition the existing concrete footings are in. A short straight run with healthy posts lands at the lower end. A full side-yard replacement with new posts, concrete, and a gate rebuild pushes toward the top.
Every quote from us is a written line-item price delivered before work starts. That price covers removal and haul-away of the failed section, new Boral-compatible rails and pickets, stainless or coated fasteners rated for coastal air, post replacement where needed, and the labor to set everything straight and true. If we find a problem underneath once we start digging, we stop and show you before we spend another dollar. Our workmanship warranty runs 365 days from the completion date, and if something fails inside that window, we come back and make it right at no charge. No dispute process, no conditions. The number you got from Isaac Pruett is the number you pay.
DIY or Call Us?
There are things worth checking yourself. Walk the fence line and press on each panel. Mark where it flexes. Check your gate hinges for rust. Note which side is dragging. That information helps us price the job accurately before we even arrive.
What we don’t recommend is pulling Boral posts or cutting rails yourself. Composite rail channels break cleanly when cut right and splinter into shards when cut wrong, and a fence under tension from a leaning post can twist while you’re working on it. We’ve rebuilt more than one fence after a well-meaning homeowner got halfway through a post pull and found the old concrete footing wrapped around a sprinkler line or a buried cable. We’re happy to do the heavy work, and you’ll know exactly what it costs before we start. Call us at (850) 780-8123 and we’ll set a time to look at what you’ve got.
FAQs
A properly installed Boral fence in Miami typically lasts 15 to 20 years before the rails start to degrade, but salt air and standing water around the post bases can knock that down to 10 to 12 years if the original install cut corners. Regular post inspection and keeping irrigation spray off the fence line extends the life noticeably.
Yes, if the posts are sound and the rails are intact, we can replace individual pickets, clips, and hardware without touching the rest of the fence. If the rails have cracked or the posts are leaning, a full section replacement is usually cheaper than trying to piece it back together. Get an exact answer by calling (850) 780-8123, because we’ll tell you straight which one your fence needs.
A standard side-yard replacement with post removal and new concrete takes two to three working days, assuming the weather cooperates and we’re not fighting a hidden utility line. Straight picket and rail swaps on existing posts can often be done in a single day.
We keep common Boral picket profiles, rail channels, stainless clips, and post hardware on hand, and anything we don’t carry arrives from our Miami supplier within two business days. Call (850) 780-8123 and we’ll confirm the part you need before we schedule, so there’s no second trip.
If your Boral fence is leaning, rattling, or falling apart a section at a time, call Mason Remodeling Co Miami at (850) 780-8123. We’ll match your existing profile, give you a written price, and get the fence standing straight again.
Written by Isaac Pruett, Owner, Mason Remodeling Co Miami at Mason Remodeling Co Miami, serving Miami and nearby areas.
